EC PropsProp Rentals · North Hollywood

EC Props / Props by set / Factory and machine shop

Props by set · Factory and machine shop

Factory and machine shop set dressing for rent: welding bay, line, foreman's corner

A factory or machine shop pull from EC Props' stock book starts with 73 lines under Welding and 11 welding screen lines, then adds 21 lines under Conveyors, 7 gear wheel lines, 7 foreman's desk lines, 13 time clock lines, 35 lines under Exhaust Fans and 7 rotating beacon lines. Each piece leaves as a will-call pick-up from 11846 Sherman Way, North Hollywood, with your crew and vehicle.

Welding bay
73 lines under Welding, 11 welding screen lines, 4 sand blaster lines
The line
21 lines under Conveyors, 7 gear wheel lines, 3 drain valve unit lines, 5 crane lines
Foreman's corner
7 desk lines, 13 time clock lines
Air and light
35 lines under Exhaust Fans, 13 floor fan lines, 7 beacon lines
Fans, clocks and beacons
As-is, without a plug
Will-call
11846 Sherman Way, North Hollywood

Around the welders: screens on casters, sand blasters, stools and benches

A welding bay pulls from more than EC's Welding category: screens from Welding Curtains, sand blasters from Sandblasters, and stools and benches. The welding gear stays with its guide, where 73 lines include the two-tank welder's carts, arc welders and welder's masks.

The table below lists every line of Welding Curtains and Sandblasters. Of the welding screen lines, 6 are a metal frame on a castered base, 2 are tri-fold frames measured by the section and in total, and the rest are a frame on feet, W-0036b on a metal frame and listed as blue, and a plastic screen without a frame. The sand blasters are floor models with a window, and the lines for S-1688 and S-2616a stop before a full size.

Stools and benches each have a guide: shop, mechanic's and swivel stools by height, 51 lines, and workbenches and work tables in wood, steel and formica, 105 lines. Tool chests and tool boards sit with the rest of a garage on the garage and gas station set page.

Where a line lists no quantity, the table says Ask, a question for the front office.

Welding screens and sand blasters for the bay
Stock numberWelding bay pieceSize as EC writes itQty
W-0036Welding screen, metal frame, castered base120" x 85"tAsk
W-0068Welding screen, on metal frame with castered base72"w x 55"t2
W-0070Welding screen, on metal frame with castered base98"w x 96"t1
W-0071Welding screen, on metal frame with castered base98"w x 79"t1
W-0072Welding screen, on metal frame with castered base122"w x 75"t3
W-0082Welding screen, on metal frame with castered base76"w x 64"tAsk
W-0002Welding screen, on metal tri-fold frameeach section is 72"w x 74"t (total 216"w x 74"t)Ask
W-0044Welding screen, on metal tri-fold frameeach section is 72"w x 72"t (total 216"w x 72"t)Ask
W-0081Welding screen, on metal frame with feet70"w x 52"tAsk
W-0036BWelding screen, on metal frame, blue96"w x 78"tAsk
W-0101Welding screen, without frame, plasticAsk
S-1688Sand blaster, red, pneumatic, floor model with window, rubber gloves and hose attached insideAsk
S-2616ASand blaster, pneumatic, floor model with window, front has 2 control knobs and 2 gauges1
S-2616BSand blaster, pneumatic, floor model with window, front has 1 gauge38"w x 24"d x 60"tAsk
S-2616CSand blaster, pneumatic, floor model with window, front has 2 control knobs38"w x 24"d x 60"t1

The line: conveyors, gear wheels, drain valve units and A-frame cranes

The line pulls from Conveyors, Gear Wheels, Factory Dressing and Chain-Related Items. The skate wheel and belt conveyors category files 21 lines, a Danger and a Caution conveyor sign among them, and the first table below is a selection, from straight skate wheel and roller sections to expandable skate wheel conveyors, belt conveyors and a ball transfer table; the category page lists the rest.

The second table lists every gear wheel, drain valve unit and crane line. Gear wheels are rusty metal, concave or flat, or wood, with G-0217 cut in half. Factory Dressing holds drain valve units, each a drum on metal skids. Chain-Related Items holds A-frame cranes on casters and a gantry with a trolley, C-0751, and C-0207 is the crane the book marks period.

Signs for the line belong to the factory and machine safety signs guide and its 127 lines. Panels, gauges and consoles have their own page, the control room and boiler room pull, and racking and the dock are gathered under warehouse and loading dock props.

Conveyors for the line, a selection
Stock numberConveyorSize as EC writes itQty
C-0044Conveyor, skate wheel, with 2 adjustable 'H' leg stands120''w x 12"d4
C-0046Conveyor, roller wheel, with 2 adjustable 'H' leg stands120"w x 18"d2
C-0788Conveyor, roller wheel, green, with 2 adjustable 'H' leg stands120"w x 24"d3
C-0703Conveyor, skate wheel, silver metal, with 2 hooks on each end, no legs18"d x 120"w2
C-0045Conveyor, skate wheel, expando, red wheels, aged124''l x 24''w x 28"tAsk
C-0221Conveyor, skate wheel, expando, black wheels, black metal frame195"l (fully extended) x 20''w1
C-0641Conveyor, skate wheel, expando, black wheels, stainless steel frame204"l (fully extended)1
C-0759AConveyor, skate wheel, expando, red wheels, metal frame156"l (fully extended) x 23''w x 28"t3
C-0426Conveyor belt, castered, 10" wide belt120"w x 12"d x 34"t1
C-0438Conveyor belt, with 20"w belt, adjustable legs, castered156"w x 25"d x 36"t2
C-0580Conveyor belt, green frame, with 20"w beige belt162"l x 24"w x 35"t1
C-0432BConveyor belt, green/silver frame, with 12"w black belt252"l x 18"w1
C-0833Conveyor table, ball transfer, gray steel120"w x 24"d x 29"t1
Gear wheels, drain valve units and cranes
Stock numberPiece on the lineSize as EC writes itQty
G-0211Gear wheel, rusty metal, concave25" diam2
G-0212Gear wheel, rusty metal, flat24" diam.1
G-0213Gear wheel, rusty metal, concave29" diam1
G-0214Gear wheel, rusty metal, concave30" diam.1
G-0215Gear wheel, wood1"d, 56" diam.1
G-0216Gear wheel, wood1"d, 60" diam.1
G-0217Gear wheel, wood, half cut1"d x 60"w x 42"t1
D-0126ADrain valve unit, drum on metal skids, longer approx. 71" long skids32"diam. x 35"t drum4
D-0126BDrain valve unit, drum on metal skids, shorter approx. 54" long skids32"diam. x 35"t drum2
D-0126CDrain valve unit, drum on metal skids, shorter approx. 54" long skids32"diam. x 35"t drum3
C-0207Crane, overhead, A-frame, I-beam top, castered, period, large/rusty steel95"w1
C-0751Crane/gantry, I-beam top, with trolley, castered, adjustable111"w x 59"d x 99"t1
C-0170ACrane, overhead, A-frame, castered, rusty, round tube frame87"w1
C-0170BCrane, overhead, A-frame, castered, rusty, with black top frame support1
C-0170CCrane, overhead, A-frame, castered, round tube frame, small I-beam top/side tops1

The foreman's corner: shop desks and time clocks

The foreman's corner pulls from Foreman's Desks and Time Clocks, and the table lists every line of both.

The large foreman's desks are gray metal, clean (D-0001a-1), aged (D-0001a-2) or with a cabinet (D-0001a-3), and the book gives each a front height and a taller back height. D-0129 and D-0001b are the small castered desks, D-0055 is a shop style desk on casters with drawers and a door, and D-0042 is listed only as a wood desk.

The book marks 7 of the time clock lines period, from a desktop clock (C-0041) and a wall mount clock (C-0183) to an arch top metal clock (T-0108) and a wood clock (T-0542). T-0073 covers assorted styles and sizes, and its line asks for the manufacturer, color and model number to be named.

Foreman's desks and time clocks
Stock numberDesk or clockSize as EC writes itQty
D-0001A-1Desk, foreman's, large, metal, gray, clean34"w x 29"d x 43"t (front) 53"t (back)1
D-0001A-2Desk, foreman's, large, metal, gray, aged34"w x 29"d x 39"t (front) 49"t (back)1
D-0001A-3Desk, foreman's, large, metal, gray, with cabinet34"w x 29"d x 43"t (front) 53"t (back)1
D-0001BDesk, foreman's, small, castered24"w x 22"d x 44"t (front) 52"t (back)Ask
D-0129Desk, foreman's, small, dark gray, with 2 drawers and 1 cabinet, castered23"w x 20"d x 39"t1
D-0055Desk, shop style on casters, 4 drawers on left, 1 door on right48"w x 28"d x 39"tAsk
D-0042Desk, woodAsk
C-0041Time clock, period, desktop, black5"w x 9"d x 10"t1
C-0183Time clock, wall mount, period9"wx5"dx11"t2
T-0053Time clock, period, black11"w x 6"d x 12"t1
T-0064Time clock, period, silver9"wx5"dx7"t1
T-0070Time clock, period, gray10"wx7"dx12"t1
T-0108Time clock, metal, arch top, period11"w x 7½"d x 13"t3
T-0542Time clock, period, wood14 1/2"w x 8 1/2"d x 35"t1
T-0049Time clock, gray10"wx7"dx12"t1
T-0072Time clock, gray15"w x 10"d x 16"tAsk
T-0074Time clock, goldtone10"wx8"dx11"t1
T-0131Time clock, gray, with lever8"w x 5"d x 10"t1
T-0175Time clock10"wx6"dx10"t2
T-0073Time clock, assorted styles and sizes5

Air and light: wall fans, drum fans and rotating beacons

Air and light come from Exhaust Fans, Floor Standing Fans and Rotating Lights. The exhaust fans category carries 35 lines, a louvered vent panel among them, and the first table below holds a selection of them: in-wall fans, a fan in a vent frame and that panel; the category page has the rest, walk-in refrigerator and freezer fan panels included.

The second table adds a selection of framed, drum and floor model exhaust fans and every line of Floor Standing Fans, from art deco and period fans on a post to drum fans and fans in a box or wood frame.

Rotating Lights holds 7 beacon lines, all in the third table: the book names a plastic or metal body, a flange bottom or a magnetized base, and a blue, red or amber lens on the lines that give them, and the book calls L-0063, a hanging beacon, hazardous location.

Warehouse bay and hazardous location fixtures are counted in their own guides: warehouse bay lights in metal and glass, 27 lines, and hazardous location lights, from fluorescents to globe fixtures, 39 lines. The rooftop and alley set page draws on the same Exhaust Fans category for a roof set.

In-wall and vent frame exhaust fans and a vent panel, a selection
Stock numberWall fan or panelSize as EC writes itQty
F-0040AExhaust fan, large, in-wall mount, 4 blade54" square x 12"d2
F-0040BExhaust fan, large, in-wall mount, 6 blade54" square x 14"d1
F-0091AExhaust fan, in wall mount, 4 blade36" square, 16"d2
F-0385Exhaust fan, in-wall, 4 curved blades, metal frame40"w x 40"t6
F-0386Exhaust fan, in-wall, 3 blades, 24" diam, with concentric circle guard, metal frame29¼"w x 29"t3
F-0351Exhaust fan, in-wall, 4 blades41"w x 41"tAsk
F-0359Exhaust fan, in metal vent frame, with louvered panels, round cage33" square, 15"d1
V-0219Vent panel, louvered57" square1
Framed, drum and floor model exhaust fans, and floor standing fans
Stock numberFloor fanSize as EC writes itQty
F-0356Exhaust fan, on castered frame, 6 blades75"diam x 29"deep, 77"t4
F-0352Exhaust fan, industrial, in metal frameunit is 55"w x 13"d x 52"t, fan is 52" x 52"1
F-0184Exhaust fan, 6 blades, old steel drum37"diam x 17" deep1
F-0380Exhaust fan, old expanded metal cage, floor model25" diameter1
F-0080Fan, floor stand, drum style, on post, with base, 6-blade17½" diam x 16"deep, 61"t2
F-0206Fan, floor stand, drum style, on post, with base, 3-blade18" diam x 12"deep, 59"t1
F-0207Fan, floor stand, drum style, on post, with base, 4-blade16" diam x 14"deep, 59"t1
F-0074Fan, floor stand, art deco, louvered sides, 3 blades, on post, with base25" diamAsk
F-0205Fan, floor stand, art deco, gray, on post, with base20" diam x 60"t1
F-0079Fan, floor stand, flat-sided cage, period, on post, with base32"diamAsk
F-0114Fan, floor stand, period, on post, with baseAsk
F-0018Fan, floor stand, on post, with baseAsk
F-0165Fan, portable, drum style, on casters, blue, with black blade guard44" diamAsk
F-0326Fan, drum style, dark gray, with handle, 4 blades34" diam x 13"d1
F-0085Fan, XL 4 blade, 4' diam., in gray wood frame, with 4 wheels72"w x 22"d x 67"t1
F-0313Exhaust fan, 3 blades, in wooden box, with 2 grills43"wx17"dx47"t1
F-0325Exhaust fan in box with shutter vents on casters58"w x 24"d x 63"t1
Rotating beacons
Stock numberBeaconSize as EC writes itQty
L-0621Light, beacon, rotating, metal body with flange bottom, amber lens5" diam. x 5" t11
L-0197Light, beacon, rotating, metal body with flange bottom6" diam. x 5" t8
L-0061Light, beacon, rotating, plastic body with flange bottom6" diam. x 7"tAsk
L-0382Light, beacon, rotating, plastic body with flange bottom, blue lens11" diam. x 11"tAsk
L-0619Light, beacon, rotating, plastic body with magnetized base6" diam. x 7"t2
L-0480Light, beacon, rotating, with red lens and guard/cage8" diam. x 6"t (body)4
L-0063Light, beacon, rotating, hanging, hazardous location6" diam. x 14"tAsk

The welding bay, the line and the foreman's corner in one request

The stock numbers from the line, the welding bay, the foreman's corner and the fans and beacons all fit on one hold list. Sending the list is a request that confirms nothing, and EC's own line on it reads "Must call or email to verify availability." Availability and rates come from the front office, and how holds and estimates work separates the list, a request, from the estimate, which needs an active account first.

Welding pulls, conveyor lengths and drain valve units

What does a welding shop set pull from outside EC's Welding category?

In EC Props' stock book, welding screens come from Welding Curtains, while the sand blasters, stools, work tables and fans each have a category of their own. Eye, ear and welding bay signs are filed under Factory/Machinery Signs, and tool chests and tool boards are on the garage and gas station set page. Masks, goggles, gloves, aprons and two-tank carts are already inside Welding.

Are the factory fans, belt conveyors and time clocks rented as-is?

Yes. EC Props' rental policies say "All items are rented on an as-is basis, without an electrical plug, which makes the items non-operational at time of pick-up." Every fan, belt conveyor, time clock and beacon falls under that sentence, along with every other piece. EC's policy goes on: "For further clarification of this policy, call the front office at 818.764.2008."

Which conveyor lines in EC's book give a length, and which give a width?

Every expandable skate wheel conveyor in EC Props' book gives a length, measured fully extended where the line says so, and so does each belt conveyor on a green or blue frame. The straight skate wheel and roller sections, the castered belt conveyors and the ball transfer table put their long side in the width figure instead. The other belt conveyor lines mix the two or stop short of a full size, so read each size as EC writes it.

What are the drain valve units in EC's Factory Dressing category?

EC Props' Factory Dressing category holds 3 lines, all of them drain valve units: a drum on metal skids, with the drum's diameter and height in the book. A longer-skid version and a shorter-skid version are listed, and the book cuts every line off after the skids. For the rest of each description, including what sets the shorter-skid lines apart, call the front office.

Sets next door, and the pages for the clocks, desks, screens and beacons

The control room, the dock and the garage have set pages, and the time clock, welding curtain, foreman's desk and rotating light pages list every line. Control room and boiler room, Warehouse and loading dock, Garage and gas station, Props by set, How a rental works, Time Clocks, Welding Curtains, Foreman's Desks, Rotating Lights.

EC Props rents every item as-is. Before you book a pick-up, read the rental policies. What this site collects is in the privacy policy.